Castle Paints

Domestic Floors

Polyurethane Floor Enamel

Polyurethane Floor Enamel – is an oil-based floor paint on a urethane alkyd resin.

Polyurethane Floor Enamel is a general-purpose, abrasion-resistant, interior floor enamel. It is used in domestic, industrial, warehouse and storage areas subject to light to medium traffic. Areas subjected to heavier traffic will require regular maintenance. A non-slip additive is available to reduce any tendency for slipping.

Share on facebook
Facebook
Share on print
Print
Share on email
Email

Surface Preparation: All surfaces must be clean, dry and free from all defective or poorly adhering material, dirt, grease and wax and be thoroughly rubbed down using suitable abrasive paper and dusted off. Remove all scale and rust by scraping with wire brushing or other conventional means. Previously painted surfaces that have loose or defective paint must be completely removed back to bare concrete. This product should not be applied to:

a) ew concrete when the moisture level is above 18%

b) Concrete floors which contain dust controlling additives (e.g. PVA) without first checking adhesion

c) Concrete floors which have been power floated to a shiny finish

d) Exterior environments

Finish: Semi-Gloss Finish

Specific Gravity: 1.1 – 1.3

Volume Solids: 42%

Practical Coverage: Approx. 12 sqm/litre depending on smooth surfaces.

Touch Dry: 4-6 Hours

Re-Coat: Approx. 16-24 Hours (Do not exceed 5 days for re-coating)

Fully-Cured/Hardness: Allow up to 6 Days

Pack Size: 2.5 Litre, 5 Litre, 20 Litre

Tile Red, Mid Grey

  Polyurethane_Floor_Enamel_TDS.pdf