Castle Paints

General Metal Finishing

High Build Vinyl

High Build Vinyl is a fast drying, high performance, anti-corrosive, self-priming glossy topcoat, for use on;

  • Metal gates, railings and fences. Adheres directly to galvanised metal or steel.
  • Steel structures subject to low temperatures or high humidity
  • Cladding Paint (test area and technical assistance required before use)
  • General metal fabrication where superior adhesion & durability is required
  • As an alternative to Pliolite as a high performance external wall coating
Share on facebook
Facebook
Share on print
Print
Share on email
Email

High Build Vinyl is a fast drying, gloss primer/topcoat giving a tough flexible coating with outstanding adhesion to many difficult areas. Used as a topcoat for Hi-Build Vinyl or as a rapid dry anti corrosive self-priming glossy topcoat. Not suitable for use in areas subject to chemical/solvent attack. For maximum corrosion protection and adhesion prime with Hi-build Vinyl then overcoat with Hi-build Vinyl gloss.

Product Type: Primer

Short Description: A fast drying, gloss primer/topcoat giving a tough flexible coating with outstanding adhesion to many difficult areas.

Drying Time (Touch Dry): 1 Hour

Drying Time (Hard Dry): 24-48 Hours

Overcoating Time: 4-6 Hours

Application Method: Brush or Spray

Suitable Surfaces:
BRIGHT GALVANISED STEEL: Remove oil and grease, thoroughly abrade with fine wet or dry abrasive paper and remove dust.

CLADDING: Prepare as galvanised steel above and always do a test area and seek technical assistance before use.

NEW STEEL: All surfaces to be coated should be clean, dry and free from any contamination. Oil and grease should be removed by solvent cleaning. Abrasive blast cleaning to Sa 2.5 or mechanical cleaning using power tool to a minimum of St 2 standard should be done.

REPAIR/MAINTENANCE: Existing paints should be checked for compatibility by applying a small test area and checking for softening or lifting of the old film. They should also be free from salt and other contaminants. Corroded or damaged areas should be blast or power tool cleaned as above.

Practical Coverage: Approx. 6 sqm/litre on smooth surfaces

Cleaning:

Storage: Always store and transport in a secure upright position. Store the closed container in a cool dry place.

Pack Size: 1 Litre, 2.5 Litre, 5 Litre

Black, White, Aluminium, RAL and BS Colours

  High_Build_TDS.pdf