Castle Paints

Industrial & Construction

Fast Dry Machinery Enamel

Fast Dry Machinery Enamel is an alkyd-based finish coat that provides a tough gloss finish and is resistant to oil.

It is generally used as a finish over Hi-Build Zinc Phosphate Primer or Micaceous Iron Oxide on steel, construction plant and machinery etc. It can also be used on suitably prepared and primed wood.

Share on facebook
Facebook
Share on print
Print
Share on email
Email

Fast Dry Machinery Enamel is generally used as a finish over Hi-Build Zinc Phosphate Primer or Micaceous Iron Oxide on steel, construction plant and machinery etc. It can also be used on suitably prepared and primed wood.

Product Type: Paint

Short Description: Fat Dry Machinery Enamel is an alkyd-based finish coat that provides a tough gloss finish and is resistant to oil.

Surface Dry: 15-20 Minutes

Hard Dry: 1-2 Hours

Overcoating Time: Min. 1-2 hours | Max. 12 hours

Surface Preparation: All surfaces must be clean, dry and free from all defective or poorly adhering material, dirt, grease and wax and be thoroughly rubbed down using suitable abrasive paper and dusted off. Remove all scale and rust by scraping with wire brushing or other conventional means.

Practical Coverage: Approx. 9 sqm/litre on smooth surfaces

Application Method: Brush or spray

Storage: Always store and transport in a secure upright position. Store the closed container in a cool dry place.

Pack Size: 1 Litre, 2.5 Litre, 5 Litre, 20 Litre

Red Oxide, Grey, Green, Black, White, RAL & BS colours

  Fast_Dry_Machinery_Enamel_TDS.pdf