Castle Paints

Domestic Floors

Anti-Slip PU Floor Enamel

Anti-Slip PU Floor Enamel is an anti-slip polyurethane-based floor paint with a very fine-textured finish. It is suitable for application to most surfaces and will provide a hard-wearing, slip-resistant, water and oil resistant finish. This product is ideal for walkways, doorways, ramps and steps, factory and garage floors. It can be used on both interior and exterior surfaces.

Share on facebook
Facebook
Share on print
Print
Share on email
Email

All surfaces to be painted should be clean, dry and free from dust, dirt, grease, oil or any loose or flaking material.

Sealing/Priming: It is only necessary to seal a porous surface such as new or bare concrete. The addition of 10% white spirit

will provide a suitable sealer coat. New concrete floors can only be painted after being allowed to dry out and cure for several months.

Floors that are finished by power floating will require either chemical treatment or mechanical abrasion before being painted.

Finish: Semi-Gloss Finish

Volume Solids: 48%

Practical Coverage: Approx. 8-10 sqm/litre depending on surface

Touch Dry: 4-6 Hours

Re-Coat: Approx. 16-24 Hours (Do not exceed 5 days for re-coating)

Fully-Cured/Hardness: Allow up to 6 Days

Pack Size: 750ml, 2.5 Litre, 5 Litre.

Castle Paints colour collection, Ral & BS colours

Anti-Slip_PU_Floor_Enamel_TDS.pdf