Fast-drying spray quality self-etching primer for application to steel and aluminium. Black has good heat resistance up to approx 200oC. It can be over-coated with a wide range of topcoats.
1 Pack Etch Primer
1 Pack Etch Primer – Polyvinyl butral, ortho-phosphoric acid
Share on facebook
Facebook
Share on print
Print
Share on email
Email
Dry Film Thickness: 12-15 microns per application
Theoretical Spreading Rate: 12 sqm per litre at 15 microns dry film thickness
Drying Time: Touch dry 20 minutes, through dry one hour at 20oC
Application: 2-3 Hours
Overcoating Time: Conventional or air-assisted spray, 40-60 psi. It may be necessary to thin up to 10% (BT3 thinner) in order to achieve atomisation.
Surface Preparation: All surfaces must be dry and oil-free. If painting non-ferrous surfaces please contact our technical dept.
Pack Size: 5 Litre.
Grey, white, black