Castle Paints

1 Pack Etch Primer

Single Pack Etch Primer – Polyvinyl butral, ortho-phosphoric acid.

Share on facebook
Facebook
Share on print
Print
Share on email
Email

Fast-drying spray quality self-etching primer for application to steel and aluminium. Black has good heat resistance up to approx 200oC. It can be over-coated with a wide range of topcoats.

Coating Type: Polyvinyl butral, ortho-phosphoric acid

Dry Film Thickness: 12-15 microns per application

Theoretical Spreading Rate: 12 sqm per litre at 15 microns dry film thickness

Drying Time: Touch dry 20 minutes, through dry one hour at 20oC

Application: Conventional or air-assisted spray, 40-60 psi. It may be necessary to thin up to 10% (BT3 thinner) in order to achieve atomisation.

Surface Preparation: All surfaces must be dry and oil-free. If painting non-ferrous surfaces please contact out technical dept.

Cleaning: After use, remove as much paint as possible from equipment before cleaning with water.

Pack Size: 5 Litre.

Grey, white, black

  Single_Pack_Etch_Primer_TDS.pdf